Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 114)

3.3 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
98 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Jump to the next line in the sample table. If the end of the table has been
reached, then a new line will be inserted automatically and the program will
jump to it.
The same function can also be triggered by pressing the [Enter] key.
Jump to the last line in the sample table.
Jump to a new, empty line.
Displaying application note
on | off (Default value: off)
If this check box is activated, then the application note defined in the method
will be displayed during the editing of the sample data.
Functions
[Apply]
Applies the sample data entered in the respective line of the sample table.
If the end of the table has been reached, then a new line will be generated
automatically. The same function can also be triggered by pressing the
[Enter] key. The next line will in addition however also be marked auto-
matically when the [Enter] is used.
[Close]
Closes the input window. The current sample data will not be applied in the
sample table thereby (this needs to be triggered beforehand with [Apply]).
3.3.1.5 Duplicate sample data
Dialog window: Workplace ▶ Sample table / Determination series ▶ [Edit] ▶ Dupli-
cate ▶ Duplicate
Number
Request as to how often the selected lines are to be duplicated. The new
lines are inserted underneath the selected range.
Range 1 ... 999
Default value 1