Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 384)

4.8 Curves subwindow ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
368 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Background
Background color
Selection of the color for the curve background.
Selection 13 colors | white
Default value white
Show endpoints
Show endpoints
on | off (Default value: on)
If this check box is activated then the endpoints found will be shown on the
curve by the symbol ♦ and labeled with EP# (potentiometric endpoint),
BP# (break point), FP# (fixed endpoint), HP (HNP), MI (minimum value) or
MA (maximum value).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection 13 colors | black
Default value black
Manual EPs
Selects the color for manually set endpoints.
Selection 13 colors | pink
Default value pink
Show evaluation lines
Show evaluation lines
on | off (Default value: off)
If this check box is activated the evaluation lines (tangents, auxiliary lines)
will be shown.
Tangents
Selection of the color for the tangents and auxiliary lines.
Selection 13 colors | light green
Default value light green
Auxiliary lines
Selection of the color for the auxiliary lines.
Selection 13 colors | blue
Default value blue