Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 253)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 237
Color
Selection of the color for the measuring point symbol.
Selection Color selection | blue
Default value blue
Link measured values
on | off (Default value: off)
If this check box is activated, then the measured value points will be joined
by a line.
4.4.2.2.3 Control chart template - Limit values
Dialog window: Database ▶ Tools ▶ Templates ▶ Control chart templates ▶ Prop-
erties
Definition of warning and intervention limits to be shown on the control
chart.
Warning limits
Warning limits are always in orange on the control chart.
Lower limit
Lower warning limit.
Input 10 digits
Range -1.0E8 ... 1.0E8 (max. 10 digits)
Upper limit
Upper warning limit.
Input 10 digits
Range -1.0E8 ... 1.0E8 (max. 10 digits)
Intervention limits
Intervention limits are displayed in red on the control chart.
Lower limit
Lower intervention limit.
Input 10 digits
Range -1.0E8 ... 1.0E8 (max. 10 digits)
Upper limit
Upper intervention limit.
Input 10 digits
Range -1.0E8 ... 1.0E8 (max. 10 digits)