Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 961)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 945
off
No stop.
Temperature
Measurement temperature
Temperature of the solution to be measured. If a temperature sensor is con-
nected, the temperature entered here is ignored.
712
Range
-170.0 ... 500.0°C
Default value 20.0
856
Range
-20.0 ... 150.0°C
Default value 20.0
Reference temperature
The electrical conductivity depends greatly on the temperature. The con-
ductivity measured at a particular temperature is thus automatically conver-
ted to this reference temperature (usually 20 °C or 25 °C).
712
Range
-170.0 ... 500.0°C
Default value 20.0
856
Range
-20.0 ... 150.0°C
Default value 20.0
Selection off
off
The conductivity is displayed for the measurement temperature.
Temperature compensation
Selection
Temperature coefficient | Sample solution
Default value Temperature coefficient
Temperature coefficient
Manual input of a constant temperature coefficient.
Sample solution
Selection of a function for the temperature coefficients from the table
Sample solutions (TC conductivity).
Temperature coefficient
Range 0.00 ... 9.99 %/°C
Default value 2.00 %/°C