Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 158)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
142 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
￭ Authorization for carrying out the method?
Check whether the registered user is authorized to carry out the method
required (see Chapter 5.4.2.3, page 401).
￭ Method executable?
Check whether the required method is executable. For methods which
are not executable, a prompt appears to perform the method check and
to modify the method accordingly (see Chapter 5.2.5, page 385).
￭ Check device (modules) and rack
Check whether the instruments (and/or instrument types), device mod-
ules (e.g. measuring input, tower, etc.) and racks required in the instru-
ment-specific commands are present and available and/or assigned. If
the instrument in a command is not yet assigned, then the device
assignment dialog window will open for the assignment of the instru-
ment.
￭ Check solutions
Check whether the solutions required in the instrument-specific com-
mands are present and available.
￭ Check sensors
Check whether the sensors required in the instrument-specific com-
mands are present and available.
￭ Check sample data
Check whether the sample data entered corresponds to the defined
method variables and is valid.
Note
When it is in the status READY, the start test can also be triggered man-
ually with the symbol or the menu items Tools
▶ Run test or [Sample
table] ▶ Run test…. In addition, the sample data test will also still be
carried out afterwards.
4 - Conditioning (only for methods with conditioning)
Conditioning is started in the case of methods which contain commands
with switched-on conditioning. The requirement for this is that the Auto-
matic conditioning option is switched on in the START command.
Conditioning is not yet part of determination and causes no counters to be
incremented (Sample number, Statistics).
￭ Conditioning condition not fulfilled
After conditioning starts, the status switches to COND BUSY. In this
status, conditioning can also be interrupted with [Hold] and resumed
with [Cont]. If an error occurs during conditioning, then neither the
error track nor the exit track will be run through.