Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1103)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1087
Dosing device
Dosing device
Selection of the dosing device (Dosinos only) to be emptied. All the dosing
device connections which are possible with the selected device type are dis-
played.
Titrando, 846, 856, 867
Selection
1 | 2 | 3 | 4
Default value 1
814, 815, 855, 864, 874
Selection
1 | 2 | 3
Default value 1
730, 774
Selection
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12
Default value 1
Titrino
Selection
external D1 | external D2
Default value external D1
Solution
Input of a solution name or selection of a solution from the solutions defined
in the solution table. If intelligent exchange or dosing units are used, then
a check will be made in the method sequence to see whether the correct
solution has been set on the selected dosing device and whether the dosing
device type is correct. With non-intelligent exchange or dosing units, only
the cylinder volume is checked. At the start of the command, a check is made
of the working life, the validity of the titer and the GLP test interval for the
selected solution.
Selection 'Solution name' | not defined
Default value not defined
not defined
No tests will be carried out.