Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 325)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 309
Only editable when the option Autoscaling is disabled.
Range
-1.0E12 ... 1.0E12
Default value 1.0E12
4.5.2.6.4.6.4.3 Properties curve evaluation - y axis
Tab: Database ▶ Determinations ▶ Reprocessing ▶ Reprocessing ▶ Curve evalua-
tion ▶ [Edit] ▶ Curve evaluation ▶ Properties ▶ y axis
On the tab y axis the parameters for the graphical presentation of the curves
on the y axis (left y axis) can be set.
Command type
Shows the type of command for which the curve properties can be defined.
The curve properties defined for each command type for the reprocessing
window are saved per client.
Autoscaling
on | off (Default value: on)
If this option is switched on then all axes in the curve window will be scaled
automatically. In this case the fields Start value and End value cannot be
edited.
Size
Selection Command-dependent selection
Command-dependent selection
Selection of the size to be shown on the y axis.
Label
Freely definable axis labeling for the y axis.
Selection 50 characters | auto
Default value auto
auto
The label from the field Size will be used.
Scaling
Fixed scaling of the y axis between the start value and the end value.
Start value
Initial value for scaling the y-axis.
Only editable when the option Autoscaling is disabled.
Range
-1.0E12 ... 1.0E12
Default value -1.0E12