Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1233)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1217
Buffer data
on | off (Default value: on)
Exports configuration data for custom buffers (see "Buffer table", page
1223).
Conductivity standards
on | off (Default value: on)
Exports configuration data for conductivity standards (see Chapter
6.3.3.4.1, page 1227).
E-mail templates
on | off (Default value: on)
Exports saved E-mail templates (see Chapter 6.3.3.5, page 1228).
Security settings
on | off (Default value: on)
Exports saved security settings (see Chapter 6.2.2.1, page 1201).
User administration
on | off (Default value: on)
Exports saved user administration (see Chapter 6.2.1.1, page 1192).
[OK]
The dialog window Save for saving data opens, in which the name and
directory for the export file must be entered. The selected configuration data
is then saved in a file with the extension .mcfg.
6.3.1.2 Import configuration data
Dialog window: Configuration ▶ File ▶ Import… ▶ Import configuration data
With File ▶ Import... and after selection of the file *.mcfg to be imported,
the dialog window Import configuration data opens, in which the fol-
lowing parts of the configuration database can be selected for import:
Note
Data that is not present in the export file cannot be selected.