Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 43)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 27
Name Syntax Description
Common
variables 'CV.Variable
name.Variable
identification' Common variables are global varia-
bles, which are adopted from the
table of the program part Configu-
ration at the start of the determina-
tion and assigned to the determina-
tion.
Enter variables
Variables must always be entered and ended with an apostrophe ' (e.g.
'MV.myVariable').
Note
When using variables, always observe their data type (Number, Text or
Date/Time).
2.4.3.2 Method variables
Dialog window: Formula Editor ▶ Variables
Method variables are method-specific and are defined in the START com-
mand of the method. There the data type (Text, Number, Date/Time) of
the variables is defined. Either sample data variables (Sample size, Unit,
Sample position, ID1…ID16) or fixed values can be assigned to these
variables. The Variables field of the Formula editor lists all Method vari-
ables which are available for the current method.
Syntax
'MV.Variable name.Variable identification'
Examples: 'MV.TestDate', 'MV.RemainingTime.VAL', 'MV.Test-
Value.OVF'
You can select the method variables directly in the formula editor under
Variables
▶ Method Variables in order to avoid syntax errors.
Method variables
Variable name Description Data type
.VAL Value of the method variable
(optional, i.e. 'MV.Factor'
=MV.Factor.VAL') (Text,
Number or Date/Time) Text, number or
date/time