Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1400)

7.11 814/815 USB Sample Processor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1384 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
7.11 814/815 USB Sample Processor
7.11.1 814/815 USB Sample Processor - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties ▶ Properties - 'Device
type' - 'Device name'
The parameters for the devices 814 USB Sample Processor and 815
Robotic USB Sample Processor XL are set on the following tabs:
￭ General
General device information such as device name, device type, serial num-
ber, etc.
￭ Tower #
Properties of Tower 1 and Tower 2 (if present).
￭ Rack
Information on the rack attached.
￭ MSB #
Properties of the MSB connector 1...3 and the peripheral devices con-
nected to.
￭ GLP
Information on GLP tests and GLP monitoring.
7.11.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Designation of the device (can be freely defined by user).
Input 50 characters
Default value Device type number_#
Device type
Display of the device type.
Program version
Shows the program version of the device.
Only visible with devices that have their own firmware.
[Update]
Opens the dialog window Load new program version (see Chapter
7.1.6, page 1331).