Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 151)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 135
Interrupt series
With this button, the ongoing determination of a sample series will still be
carried out to completion, but no new determination will be started. The
button is present in the status BUSY (determination is running). The button
is disabled (light gray) in all other cases. When [Pause] is pressed, this button
will be replaced in the display by [Cont].
Continue series
Start of the next determination of an interrupted sample series. The button
is only present in the status HOLD (series interrupted). Pressing [Cont] will
cause this button to be replaced again in the display by [Pause].
3.6.4.3 Determination series - Status display
Tab: Workplace ▶ Run ▶ Determination series
The current status of the workplace will be displayed on the tab Determi-
nation series:
Status
Selection READY | BUSY | HOLD | PAUSE | COND BUSY |
COND READY | COND HOLD | ERROR
READY
Ready for starting a determination or for conditioning.
BUSY
Determination running.
HOLD
Determination interrupted.
PAUSE
Series interrupted.
COND BUSY
Conditioning running (will be displayed only if no determination is run-
ning).
COND READY
Condition requirement fulfilled (will be displayed only if no determination
is running).
COND HOLD
Conditioning interrupted (will be displayed only if no determination is
running).