Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 123)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 107
3.3.2.4 Properties - Process
Dialog window:Workplace ▶ Tools ▶ Sample table ▶ New… ▶ Sam-
ple table 'Name' ▶ [Sample table] ▶ Properties… ▶ Properties -
Sample table 'Name'
Dialog window:Workplace ▶ Run ▶ Determination series ▶ Prop-
erties Run window ▶ Properties - Determination series
Options for processing the working sample table in the Workplace window
in the tab Determination series.
Delete processed lines
on | off (Default value: off)
If this option is enabled, then lines in the working sample table which have
already been processed completely will be deleted automatically.
Method selection by assignment ID
on | off (Default value: off)
If this option is enabled, then the selected sample identification will be used
for the method selection in the working sample table. This identification
receives the designation Assignment ID, which can then no longer be
changed; if this ID matches one of the Assignment IDs from the sample
assignment table (see Chapter 3.4.1, page 113), then the respective
method from this table will be entered in the field Method.
Selection ID1 | ID2 | ID3 | ID4 | ID5 | ID6 | ID7 | ID8 | ID9 |
ID10 | ID11 | ID12 | ID13 | ID14 | ID15 | ID16
Default value ID1
Request assignment ID
on | off (Default value: off)
If this option is enabled, the Assignment ID will be queried immediately
after the start of the determination.
Actions for marked sample table lines
Selection
Pause series ([Pause]) and show message | Stop
series ([Stop])
Default value Pause series ([Pause]) and show message
Pause series ([Pause]) and show message
If this option is selected, then the series is interrupted before the start of
the marked line (equivalent to [Pause]). At the same time a message will
appear which also contains the text defined in the message box.