Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1051)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1035
[Properties]
Opens the dialog window Calibration wavelength # to edit the values
selected in the table (see Chapter 5.6.5.9.5, page 1035).
[Delete]
Deletes the selected line.
5.6.5.9.5 CAL Spec - Calibration wavelength #
Tab: Method ▶ CAL Spec ▶ Properties... ▶ Calibration wavelengths ▶ [New]/[Prop-
erties] ▶ Calibration wavelength #
Wavelength
Range 200.0 ... 1100.0 nm
Default value 'empty' nm
5.6.6 Dosing commands
5.6.6.1 Dosing commands - Overview
Menu item: Method ▶ Paste ▶ New command... ▶ Dosing
Commands for Dosing with dosing units and exchange units.
The following six dosing commands can be selected:
￭ ADD
Adding a predefined volume.
￭ DOS pH
Controlled dosing with monitoring of measured value pH and tempera-
ture
￭ DOS U
Controlled dosing with monitoring of measured value U and temperature
￭ LQH
Extensive dosing possibilities with a Dosino.
￭ PREP
Preparing a exchange or dosing unit.
￭ EMPTY
Emptying a dosing unit.
5.6.6.2 ADD
5.6.6.2.1 ADD - Overview
Dialog window: Method ▶ ADD ▶ Properties... ▶ ADD - 'Command name'
Command for dosing a defined volume of a solution with an exchange
or dosing unit.
Devices
This command can be executed with the following devices: