Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 280)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
264 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Serial number of measuring input.
Type of temperature sensor (Pt 1000 or NTC).
Nominal resistance of connected NTC sensor.
Material constant of the NTC resistance referred to meas-
uring the resistance at 25 °C and 50 °C.
– Data on sensor.
Sensor name.
Sensor type.
Order number of sensor.
Serial number of sensor.
Date on which the sensor was used for the first time.
Cell constant of the conductivity sensor.
Slope of the sensor.
Electrode zero point of the pH sensor.
Ion (valency) of the ISE sensor.
Electrode zero point of the sensor.
Blank value of the ISE sensor.
Calibration temperature.
Calibration date.
Calibration method.
Measuring input at calibration.
– Calibration data
Sensor name.
Sensor type.
Slope of the sensor.
Electrode zero point of the pH sensor.
Ion (valency) of the ISE sensor.
Electrode zero point of the sensor.