Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 189)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 173
DOS
Selection
Volume | Measured value | Temperature | time
| dV/dt | Calculated 1…3 | External 1…3
Default value Volume
Color
Selection of the curve color for the quantity to be shown on the y1 axis.
Selection Color selection | blue
Default value blue
y2 axis
Selection of the quantity to be shown on the y2 axis (right y axis).
DET
Selection
off | Measured value | Volume | time | Temper-
ature | ERC | Calculated 1…3 | External 1…3
Default value off
MET
Selection
off | Measured value | Volume | time | Temper-
ature | dMW | Calculated 1…3 | External 1…3
Default value off
SET
Selection
off | Measured value | Volume | Temperature |
time | dV/dt | Calculated 1…3 | External 1…3
Default value off
KFT
Selection
off | Measured value | Volume | Temperature |
time | dV/dt | Calculated 1…3 | External 1…3
Default value off
KFC / BRC
Selection
off | Measured value | time | amount | drift |
Charge | dV/dt | Ugen | Igen | Calculated 1…3 |
External 1…3
Default value off
STAT
Selection
off | Measured value | Volume | Temperature |
time | dV/dt | Calculated 1…3 | External 1…3
Default value off