Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 59)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 43
Syntax
'DV.Variable name'
Examples: 'DV.DUR', 'DV.STT'
You can select the determination variables directly in the formula editor
under Variables/Determination variables in order to avoid syntax errors.
Available determination variables
Variable name Description Data
type
DUR Duration of the determination in s Number
STT Time point at which the determination was started Date/
Time
2.4.3.6 System variables
Dialog window: Formula Editor ▶ Variables
System variables are general variables which are adopted in the determina-
tion at the start of the determination. They are assigned neither to individual
commands nor to determinations. The Variables field of the Formula editor
lists all system variables which are available for the current method.
Syntax
'SV.Variable name'
Examples: 'SV.SIN', 'SV.SLI'
You can select the system variables directly in the formula editor under
Variables/System variables in order to avoid syntax errors.
Available system variables
Variable name Description Data
type
ACC Autostart actual counter Number
ACE Autostart setpoint counter Number
FUN Full name of the logged-in user Text
REM Remarks Text
RUN Sample number Number
SEN Indication whether the end of the sample table has been reached; 1 = yes, 0 =
no Number
SIN Indication whether the determination has been started as a single determination or
within a series; 1 = single determination, 0 = series determination Number
SLI Sample table actual line (number) Number
STA Indication whether the statistics is activated; 1 = yes, 0 = no Number