Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 165)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 149
Jump to the previous line in the working sample table.
Option of entering the desired line number to which the program jumps
when the [Enter] is actuated.
Jump to the next line in the working sample table. If the end of the table
has been reached, then a new line will be inserted automatically and the
program will jump to it.
Jump to the last line in the working sample table.
Jump to a new, empty line.
Displaying application note
on | off (Default value: off)
If this check box is activated, then the application note defined in the method
will be displayed during the editing of the sample data.
Functions
[Apply]
Applies the sample data entered in the respective line of the working sample
table. If the end of the table has been reached, then a new line will be
generated automatically. The same function can also be triggered by press-
ing the [Enter] key. The next line will in addition however also be marked
automatically when the [Enter] is used.
[Close]
Closes the input window. The current sample data will not be applied in the
working sample table thereby (this needs to be triggered beforehand with
[Apply]).
3.6.4.9.4 Duplicate sample data
Dialog window: Workplace ▶ Sample table / Determination series ▶ [Edit] ▶ Dupli-
cate ▶ Duplicate
Number
Request as to how often the selected lines are to be duplicated. The new
lines are inserted underneath the selected range.