Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1176)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1160 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
5.6.10.5.2 WAIT - Properties
Dialog window: Method ▶ WAIT ▶ Properties... ▶ WAIT - 'Command name'
Command name
Name of the command.
Input 25 characters
Wait
Selection of the following options:
Selection Stop track and waiting for [Continue] | Stop all
tracks and waiting for [Continue] | Waiting
time
Default value Stop track and waiting for [Continue]
Stop track and waiting for [Continue]
If this option is enabled, the track containing the WAIT command is
stopped and a message is displayed. The method run can only be con-
tinued by pressing [Continue].
Stop all tracks and waiting for [Continue]
If this option is enabled, all tracks currently running are stopped and a
message is displayed. The method run can only be continued by pressing
[Continue].
Waiting time
If this option is enabled, the method run will be continued automatically
after this waiting time. The text defined below under Message is dis-
played during the waiting time.
Waiting time
This parameter can only be edited for Wait= Waiting time
Range 0 ... 9999.9
Default value 0
Selection s | min
Default value s
Message
The message defined here is displayed while the track is stopped or during
the waiting time. The text editor for entering or changing the message is
opened with or by double-clicking into the text field (see Chapter
2.5.2, page 79). The formula editor can also be called up inside the text field
(see Chapter 2.4, page 23).
Input Text (unlimited)