Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 437)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 421
Message by E-mail
on | off (Default value: off)
If this option is enabled, the message defined in the text box will be sent to
the address defined under if the result limits are exceeded.
[E-mail]
Opens the window Send E-mail for defining the E-mail parameters (see
Chapter 5.6.2.2.6, page 422).
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted in addition to the
message defined above when a limit is exceeded.
Action
Note
Is displayed only for method variables of the types Number or Date/
Time.
Action
on | off (Default value: off)
If this option is enabled, one of the two following actions will be carried out
automatically in the event that the result limits are exceeded.
Selection Stop determination | Stop determination and
series
Default value Stop determination
Stop determination
If this option is selected, then the current determination (or conditioning)
will be stopped. The next determination of the series will be started
afterwards.
Stop determination and series
If this option is selected, then the current determination (or conditioning)
will be stopped. The next determination of the series will not be started
afterwards.