Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1428)

7.14 874 Oven Sample Processor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1412 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Connected devices
Information about the following peripheral devices connected to the MSB
connector appears here:
Dosing device 1
Dosing device type
Display of the dosing device type.
Dosing device serial number
Display of the serial number of the connected dosing device.
Stirrer 1
Stirrer type
Display of the stirrer type.
Stirrer serial number
Display of the serial number of the connected stirrer.
Remote box 1
Display of the connected remote box.
7.14.6 Properties - Oven
Tab: Configuration ▶ Device ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Oven
On the tab Oven the oven parameters are set:
Oven program version
Shows the program version of the oven module.
Display for the 874 Oven Sample Processor only.
Oven serial number
Shows the serial number of the oven module.
Display for the 874 Oven Sample Processor only.
Initial temperature
Enter the initial temperature of the oven. Entering an initial temperature
means that the oven will heat up to the set temperature when it is switched
on. off means that the oven will not be switched on.