Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1198)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1182 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
5.6.11.7.2 PORT - Properties
Dialog window Method ▶ PORT ▶ Properties... ▶ PORT - 'Command name'
Command name
Name of the command.
Input 25 characters
Device
Device name
Selection of a device from those available in the device table. The only devi-
ces which shall be offered are those with which the command can run.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start of
the method.
Device type
Display or selection of the device type. If a device is selected under Device
name, then this Device type field can no longer be edited, and the device
type belonging to the selected device is displayed instead
If the option not defined is selected as Device name, any device types or
device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection Device types | Titrando
Default value Titrando
Multi-port valve
Multi-port valve
Select the MSB connector the multi-port-valve is connected to.
Selection 1 | 2 | 3 | 4
Default value 1
Port
Select the target port to be switched to.
Range 1 ... 12
Default value 1
Shift direction
Select the direction in which the valve moves to the target port.