Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1431)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Devices
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1415
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can choose whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period has expired will be automatically saved with the deter-
mination.
Stop determination
The running determination will be automatically terminated. The follow-
ing message must be confirmed with [OK].
7.15 Avantes Spectrometer
7.15.1 Avantes Spectrometer - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties ▶ Properties - 'Device
type' - 'Device name'
The parameters for the Avantes Spectrometer are set on the following
tabs:
￭ General
General device information such as device name, device type, serial num-
ber, etc.
￭ Settings
Information on light source and output signal.
￭ Detector
Information on the detector.
￭ Kalibrierung
Information on wavelength calibration.
￭ Dark spectrum
Information on dark spectrum.
￭ Reference spectrum
Information on reference spectrum.
￭ GLP
Information on GLP tests and GLP monitoring.
7.15.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Designation of the device (can be freely defined by user).