Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 341)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 325
right of the curve the legend is shown with the line number in the determi-
nation table belonging to the determination.
The legend consists of the content of a data field which can be defined in
the options of the template and of a counter, which identifies the curves if
the same command has been executed several times during a determination.
[Print (PDF)]
Open the dialog window Print curves (PDF) (see Chapter 4.5.2.18, page
325). The content of the curve overlay with legend can be shown as a PDF
file in the required format.
4.5.2.18 Print overlaid curves
Dialog window: Database ▶ Determinations ▶ Overlay curves... ▶ Overlay
curves ▶ [Print (PDF)] ▶ Print curves (PDF)
With [Print (PDF)] in the dialog window Overlay curves the dialog win-
dow Print curves (PDF) is openend.
Orientation
Selection
Portrait | Landscape
Default value Landscape
Portrait
Produces control chart in portrait format.
Landscape
Produces control chart in landscape format.
Comment
Possibility of entering comments on the control chart which will be produced
together with the control chart.
Input 1000 characters
[OK]
Close dialog window. The control chart is shown in the required format as
a PDF file and opened directly with the Acrobat Reader; it can then be printed
out and/or saved.
4.5.2.19 Print control chart
Dialog window:Database ▶ Determinations ▶ Control
chart... ▶ Control chart ▶ [Print (PDF)] ▶ Print control chart (PDF)
In the dialog window Print control chart (PDF) the format for the printout
of the control chart is indicated.
Orientation
Selection
Portrait | Landscape
Default value Landscape