Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1215)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1199
Note
It is only possible to delete a user group when the group no longer con-
tains any users.
6.2.1.3 User
6.2.1.3.1 User - Details
Dialog window: Configuration ▶ Tools ▶ User administration
If in the left-hand side of the dialog window User administration a user
in a user group has been selected, then details of the user will be shown at
the right-hand side.
User
Shows the short name of the user that must be entered in the field User.
This name is defined when a new user is entered for the first time and cannot
be subsequently modified.
Input 24 characters
Full name
Full name of the user.
Input 256 characters
Status
Shows the current status of the user. Only users of the group Administra-
tors can modify the status.
Selection active | inactive | removed
active
Users with the status enabled can log in in the usual way. An exception
is the first login after a change in status from disabled or removed to
enabled. In this case a Start password must be issued with which this
user can then log in.
inactive
Users with the status disabled can no longer log in. They are automat-
ically given this status as soon as the number of incorrect login attempts
defined in the Security settings has been exceeded.