Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1502)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1486 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Inert gas valve
Switch the inert gas valve on the Oven Sample Processor on/off.
[Start]
Switch on inert gas valve. In the status display the running time since start
is shown.
[Stop]
Switch off inert gas valve.
8.4.5 Measure
8.4.5.1 Measure - Overview
Program part: Manual Control
If in the subwindow for the device selection, a measuring input for a device
is selected, then the functions and parameters belonging to this device are
displayed in the subwindow Functions/Parameters.
Measuring functions
The measuring functions are displayed on the following tabs:
￭ Measure
￭ Intensity
￭ Sample spectrum
Devices
The measuring functions can be carried out with the following devices:
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 784, 785, 794,
795, 798, 799
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 890, 901, 902, 904,
905, 906, 907
Dosing Interface: 846
Conductometer: 712, 856
pH/Ion - Meter: 867
Robotic Titrosampler : 855
Spectrometer: Avantes
8.4.5.2 Measure - Measure
Program part: Manual Control
Here the measuring can be started and stopped.