Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 152)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
136 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
ERROR
Error.
3.6.4.4 Determination series - Determination parameters
Tab: Workplace ▶ Run ▶ Determination series
User
If the option User name required is enabled in the security settings, then
the abbreviation of the currently registered user will be displayed in this field
(see Chapter 6.2.2.2, page 1202). This field is then not available for editing.
If work is done without registering, then a user name can be entered in this
field (only in the status READY).
Input 50 characters
Sample number
The sample number is set to 0 for all workplaces at the time of each program
start. Each time a determination is started, it is incremented by +1 . It can
be edited by the user only when it is in the status READY.
Range 0 ... 99999
Default value 0
Remark
Freely definable remarks concerning the determination, that are saved
together with the determination. Prepared sample texts can also be selected
instead of making manual entries (see Chapter 3.5.1, page 115).
Note
The field Remarks can also be modified live while determinations are
running. The context-sensitive menu item Modify remarks is used to
open the dialog window Live modifications (see Chapter 3.6.3.6, page
123).
Input 100 characters
Autostart
Number of automatic, internal starts of determinations within a sample ser-
ies.
The first field after Autostart shows the number of determinations already
carried out (Actual counter). This field cannot be edited, but it can be reset
to 0 in the status READY or PAUSE through the use of the context-sensitive
menu item Reset autostart counter.