Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 288)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
272 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
– Sensor data
– Data on sensor.
Type of sensor:
XML_SENSOR_OTHER = Other sensor
XML_SENSOR_PH = pH sensor
XML_SENSOR_ION = ISE sensor
XML_SENSOR_METAL = Metal sensor
XML_SENSOR_TEMP = Temperature sensor
XML_SENSOR_COND = Conductivity sensor
– Data on measuring input.
Number of measuring input.
Type of analog/digital converter.
Serial number of measuring input.
Type of temperature sensor (Pt 1000 or NTC).
Nominal resistance of connected NTC sensor.
Material constant of the NTC resistance referred to meas-
uring the resistance at 25 °C and 50 °C.
– Data on sensor.
Sensor name.
Sensor type.
Order number of sensor.
Serial number of sensor.
Date on which the sensor was used for the first time.
Slope of the sensor.
Cell constant of the conductivity sensor.
Electrode zero point of the pH sensor.
Ion (valency) of the ISE sensor.
Electrode zero point of the sensor.
Blank value of the ISE sensor.
Calibration temperature.
Calibration date.