Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 941)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 925
Identifica-
tion Description
.EGF Last measured gas flow rate (measured value following
processing of the command) in mL/min
.EME Final measured value (measured value after processing
of the command) in the unit of the measured value
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
.GMA Maximum gas flow rate in mL/min
.GMI Minimum gas flow rate in mL/min
.GMN Average gas flow rate in mL/min
.IGF Initial gas flow (measured value at the time of the start
of the command) in mL/min
.IME Initial measured value (measured value before start con-
ditions are processed) in the unit of the measured value
.LP.CAx Calculated value × (1...3) for the last measuring point of
the measuring point list
.LP.EXx External value × (1...3) for the last measuring point of
the measuring point list
.LP.GFL Gas flow value for the last measuring point of the meas-
uring point list in mL/min
.LP.MEA Measured value (temperature) for the last measuring
point of the measuring point list in the unit of the meas-
ured value
.LP.TEM Temperature for the last measuring point of the meas-
uring point list in °C
.LP.TIM Time in s until the last measuring point of the measuring
point list is reached
.MA.MEA Maximum measured value (temperature) in the unit of
the measured value
.MA.TEM Temperature for the maximum measured value in °C
.MA.TIM Time in s until the maximum measured value is reached
.MI.MEA Minimum measured value (temperature) in the unit of
the measured value
.MI.TEM Temperature with minimum measured value in °C