Product description – Lenze I/O system 1000 System Manual User Manual
Page 79
Product description
I/O compound modules − digital I/O
2 digital inputs with time stamp function − EPM−S207
l
79
EDSIO1000 EN 7.0
3.6.5
2 digital inputs with time stamp function − EPM−S207
This module detects up to two binary control signals from the process level and transmits
them to the higher−level bus system.
If the time stamp function is parameterised, in the case of a specified edge (rising or
falling), the current time of the system−internal
ms−ticker is stored as a time stamp entry in
the process image along with the status of the inputs and a consecutive number.
Depending on the configuration, up to 15 time successive stamp entries can be recorded
in the process image.
Features
ƒ
2 digital inputs
ƒ
up to 15 time stamp entries can be recorded
ƒ
Suitable for switches and proximity switches
ƒ
LEDs display the switching states of the digital inputs (even when electronic supply
is switched off)
Overview
2
6
3
7
4
8
1
5
EPM-S207
DC24V
0V
DI
DI1
DI2
1
0
SLIOS207
Fig. 3−19
Elements and circuit diagram
0
Displays for module status
1
Terminals
1 ... 8
Connection number
... Bit number in bit presentation