Lenze I/O system 1000 System Manual - Manual (Page 590)

DeviceNet communication
Parameterising the counter
Two counters 32 bits, 24 V DC − EPM−S601
11
l
590 EDSIO1000 EN 7.0
Lenze Description/value Name Pos. in
string of
digits
10 Set value counter 1 Counting method:
0x3111: byte 3 (high byte)
0x3112: byte 2
0x3113: byte 1
0x3114: byte 0 (low byte) 00
h
11 Final value counter 1 Counting method:
0x310D: byte 3 (high byte)
0x310E: byte 2
0x310F: byte 1
0x3110: byte 0 (low byte) 00
h
12 Loading value
counter 1 Counting method:
0x3109: byte 3 (high byte)
0x310A: byte 2
0x310B: byte 1
0x310C: byte 0 (low byte) 00
h
13 Hysteresis counter 1 The hysteresis for instance serves to avoid frequent switching
operations of the output and/or triggering of the alarm when
the count value is within the range of the comparison value. For
the hysteresis you can select a range between 0 and 255. With
the settings 0 and 1 the hysteresis is switched off.
The hysteresis has an effect on the zero crossing, comparison,
overflow/underflow. 00
h
14 Reserved
15 Alarm response
counter 2 See counter 1 00
h
16 Counter function
counter 2 See counter 1 00
h
17 Comparator
counter 2 See counter 1 00
h
18 Signal evaluation
counter 2 See counter 1 00
h
19 Set value counter 2 See counter 1 00
h
20 Final value counter 2 See counter 1 00
h
21 Loading value
counter 2 See counter 1 00
h
22 Hysteresis counter 2 See counter 1 00
h