Lenze I/O system 1000 System Manual - Manual (Page 28)

Product description
Module design
Function elements
3
l
28 EDSIO1000 EN 7.0
3.4.6 Function elements
SLIO089
Fig. 3−8 Standard function elements (on the left bus coupler module, on the rechts I/O compound module)
0 Base module «DIN rail locking lever
1 Contacts − backplane bus
2 Contacts, I/O supply
3 Terminals
4 Electronic module «base module locking button
5 Status displays (LEDs) with labelling strips
)
Note!
The description of the module−specific function elements can be found in the
following module descriptions.