Lenze I/O system 1000 System Manual - Manual (Page 541)

EtherCAT Kommunikation
Diagnostics
Access to diagnostic data
10
l
541 EDSIO1000 EN 7.0
EPM−S604 − diagnostic alarm
Diagnostic byte Bit 7 ... 0
1 Bit 0: Set in the case of module fault
Bit 1: Set in the case of internal error
Bit 2: Set in the case of external error
Bit 3: Set if channel error available
Bit 4: Set in the case of missing external supply voltage
Bit 6 ... 5: 0 (fixed)
Bit 7: Parameterisation error
2 Bit 3 ... 0: Module class, 1000
b
: function module
Bit 4: Channel information available
Bit 7 ... 5: 0 (fixed)
3 0 (fixed)
4 Bit 5 ... 0: 0 (fixed)
Bit 6: Process alarm lost
Bit 7: 0 (fixed)