Lenze I/O system 1000 System Manual - Manual (Page 209)

Product description
I/O compound modules − counter
Two counters 32 bits, 24 V DC − EPM−S603
3
l
209 EDSIO1000 EN 7.0
Counting continuously
Limits Counting range
Lower counting limit −2 147 483 648 (−2 31 )
Upper counting limit +2 147 483 647 (2 31 −1)
Function:
ƒ For starting the counting process the internal gate has to be opened.
– The counter always counts from 0.
– If the counter reaches the upper counting limit when counting forwards, and if a
further count pulse in positive direction occurs, the counter skips to the lower
counting limit and continues to count from there.
– If the counter reaches the lower counting limit when counting backwards, and if a
further negative count pulse occurs, the counter skips to the upper counting limit
and continues to count from there.
– If values are exceeded or not reached, the status bits STS_OFLW or STS_UFLW are
set. These bits remain set until they are reset with RES_SET in the control word.
ƒ For stopping the counting process the internal gate has to be closed.
Upper counting
limit value
Lower counting
limit value
0
Counter starts Counter starts Counter stops Counter stops
Overflow
Underflow
Time
Counter content
SLIO046
Fig. 3−69 Example of "Counting continuously"