Lenze I/O system 1000 System Manual - Manual (Page 150)

Product description
I/O compound modules − temperature measurement
Four (two) analog inputs for resistance tests − EPM−S404
3
l
150 EDSIO1000 EN 7.0
Technical data
EPM−S404: Rated data
Module identifier 1030
dec
Current consumption/power loss
Current consumption from backplane bus 75 mA
Power loss 1 W
Analog inputs
Number of inputs 4
Cable length
shielded 200 m
Load voltage
Nominal value DC 24 V
Current consumption from load voltage
L+ 30 mA (without load)
Resistor inputs
Resistance ranges 0 ... 60 W
0 ... 600 W
0 ... 3000 W
Operational error limit ± 0.4 %
Basic error limit ± 0.2 %
Resistance thermometer inputs
Resistance thermometer ranges Pt100
Pt1000
Ni100
Ni1000
Operational error limit ± 0.4 %
Basic error limit ± 0.2 %
Measuring principle Sigma−delta
Resolution 16 bits
Basic conversion time 4.2 ... 324.1 ms (50 Hz) per channel
3.8 ... 270.5 ms (60 Hz) per channel
Interference voltage suppression for a
frequency of > 80 dB at 50 Hz (UCM < 60 V)
Destruction limit (input voltage) 9 V
Temperature error
(relating to input range) ± 0.005 %/K
Linearity distortion
(relating to input range) ± 0.005 %
Repeat accuracy (in steady−state vibration at
25°C, relating to the input range) ± 0.05 %
Input data size 8 bytes
Status, alarm, diagnostics
Status display Yes
Alarms Yes, parameterisable
Process alarm Yes, parameterisable
Diagnostic alarm Yes, parameterisable
Diagnostic function Yes
Diagnostic information can be read out Possible
Module status Green LED
Module error display Red LED
Channel error display Red LEDs per channel