Lenze I/O system 1000 System Manual - Manual (Page 360)

CANopen communication
Index table
8
l
360 EDSIO1000 EN 7.0
8.20 Index table
ƒ The indices are numbered in ascending order for reference purposes.
ƒ How to read the index table:
Column Abbreviation Meaning
Index Ixxxx
h
Index Ixxxx
h
1 Subindex 1 of Ixxxx
h
2 Subindex 2 of Ixxxx
h
Ixxxx
h
¿
After entry, the index parameter value is stored in the EEPROM
Ixxxx
h
*
Index parameter value is stored in the EEPROM with I2003
h
= 1
Name Index name
Lenze Lenze setting, setting on delivery
Selection 1 {%} 99 Min. value (unit) max. value
Important – Brief, important explanations
^ Page x Reference to detailed explanations
Index Name Possible settings Important
Lenze Selection
I1000
h
Device type Display only
Type
I1001
h
Error register Display only
^ 349
Bit 0 Generic An unspecified error has
occurred (flag set on each
error message)
Bit 1 Reserved
Bit2 Reserved
Bit3 Reserved
Bit4 Comm. Communication error
(Overrun CAN)
Bit 5 Reserved
Bit6 Reserved
Bit 7 ManSpe
c. Manufacturer−specific error Shown in detail in I1003
h
I1003
h
Display only
Fault memory
1 Actual errors
I1004
h
Number of
supported
PDOs Display only
1 Number of
synchronous
PDOs
supported
2 Number of
synchronous
PDOs
supported
I1005
h
*
Sync COB−ID 128 128 {1} 2047