Product description, Bus coupler modules ethercat − epm−s130, Status displays – Lenze I/O system 1000 System Manual User Manual
Page 46
Product description
Bus coupler modules
EtherCAT − EPM−S130
l
46
EDSIO1000 EN 7.0
Status displays
Fieldbus status LEDs
0
View
Pos.
Designation
Colour
Explanation
1
10
1
PWR
Green
On: bus coupler is supplied with voltage
2
SF
Red
Flashes at 0.5 Hz: EtherCAT timeout (watchdog)
Flashes at 1 Hz: status change due to error
Flashes at 2 Hz: configuration error
3
RUN
Green
On: bus coupler in operational status
Flashes at 1 Hz: bus coupler in pre−operational
status
Flashes at 2 Hz: bus coupler in safe operational
status
Off: bus coupler in initialisation status
4
L/A1
Green
Off: no communication with preceding EtherCAT
node
On: preceding EtherCAT node is connected
5
IF1
Red
On: internal error in communication with
preceding EtherCAT node
6
L/A2
Green
Off: no communication with following EtherCAT
node
On: following EtherCAT node is connected
7
IF2
Red
On: internal error in communication with
following EtherCAT node
8
−
−
Not assigned
9
SLIO001
10
Module status LEDs
0
View
Pos.
Designation
Colour
Explanation
1
10
1
PWR IO
Green
On: I/O supply okay
2
PF IO
Red
On: Fuse for I/O supply is defective
3
PWR
Green
On: Electronic supply okay
4
PF
Red
On: Fuse for electronic supply defective
5
−
−
Not assigned
6
7
8
9
SLIO001
10