Lenze I/O system 1000 System Manual - Manual (Page 699)

PROFINET communication
Parameterising technology modules
2 digital outputs with PWM functionality − EPM−S620
12
l
699 EDSIO1000 EN 7.0
Diagnostic data
Since this module does not support alarms, the diagnostic data provides information
about this module.
Diagnostic data set − data set 01h
Name Byte Function Default
ERR_A 1 Reserved 00
h
MODTYP 1 Module information
Byte 0:
Bit 3 ... 0: module class (1111b: digital module)
Bit 4: channel information available
Bits 7 ... 4: 0 reserved 15
h
ERR_C 1 Reserved 00
h
ERR_D 1 Reserved 00
h
CHTYP 1 Channel type
Byte 0:
Bits 6 ... 0: channel type (72h: digital output)
Bit 7: reserved 72
h
NUMBIT 1 Number of diagnostic bits per channel
Byte 0: here 00
h
00
h
NUMCH 1 Number of channels in module
Byte 0: here 02
h
02
h
CHERR 1 Reserved 00
h
CH0ERR ... CH7ERR 6 Reserved 00
h
DIAG_US 4 Value of ms ticker when diagnostics occur
Bytes 0 ...3
0