Lenze I/O system 1000 System Manual - Manual (Page 238)

Technical data 4
l
238 EDSIO1000 EN 7.0
4 Technical data
)
Note!
The technical data of the I/O system modules can be found in the individual
module descriptions which are provided in the "Product description" chapter.
General data
Conformity and approval
Conformity
CE 2006/95/EG Low−Voltage Directive
Approval
UL UL 508 File No. E343358
Other
RoHS − Products lead−free in accordance with EC Directive
2002/95/EC
Protection of persons and device protection
Degree of protection IP20
Electrical isolation
To the fieldbus Electrically isolated
To the process level Electrically isolated
Insulation resistance IEC 61131−2
Insulation voltage
against reference earth
of the inputs/outputs AC / DC 50V, for test voltage AC 500V
Protective measures Against short circuit
EMC
Noise emission EN 61000−6−4 Class A (industrial premises)
Noise immunity Zone B EN 61000−6−2 Industrial premises
EN 61000−4−2 ESD; severity: 3, i.e.
8 kV in the case of air discharge,
4 kV in the case of contact discharge
EN 61000−4−3 RF interference (housing)
80 MHz 1000 MHz, 10 V/m 80 % AM (1 kHz)
EN 61000−4−4 Burst, severity: 3
EN 61000−4−5 Surge, severity 3 *
EN 61000−4−6 RF conducted
150 kHz 80 MHz, 10 V/m 80 % AM (1 kHz)
* Due to the high−energy single current pulses, a surge requires a suitable external connection with lightning
protection elements like for instance lightning conductors and overvoltage arresters.