Lenze I/O system 1000 System Manual - Manual (Page 329)

CANopen communication
Parameterising technology modules
RS232 interface − EPM−S640
8
l
329 EDSIO1000 EN 7.0
Parameter data − ASCII protocol
Lenze Description/value Name Index/
subindex
0x3108/x Character delay time
(HIGH byte) Character delay time; the character delay time defines
the max. permissible interval between two received
characters within a frame. If the character delay time is
0, the module independently calculates the character
delay time on the basis of the baud rate (approx. the
double character time).
0 ... 65535 [ms] (0000
h
.:. FFFF
h
)
00
h
0x3109/x Character delay time (LOW
byte) 0Ah
0x310A/x Number of receive buffers Defines the number of receive buffers. As long as only
one receive buffer is used and is assigned, no more
data can be received. If up to 250 receive buffers are
connected, the received data can be redirected to a still
free receive buffer.
1 ... 255 (01
h
... FF
h
)
01
h
0x310B/x
...
0x3110/x Reserved