Lenze I/O system 1000 System Manual - Manual (Page 544)

EtherCAT Kommunikation
Diagnostics
Access to diagnostic data
10
l
544 EDSIO1000 EN 7.0
EPM−S600 − diagnostic alarm
Diagnostic byte Bit 7 ... 0
1 Bit 0: Set if module fault
Bit 1: 0 (fixed)
Bit 2: Set in the case of an external error
Bit 3: Set in the case of a channel error
Bit 6 ... 4: 0 (fixed)
Bit 7: Parameterisation error
2 Bit 3 ... 0: Module class, 1000
b
: function module
Bit 4: Channel information available
Bit 7 ... 5: 0 (fixed)
3 0 (fixed)
4 Bit 5 ... 0: 0 (fixed)
Bit 6: Process alarm lost
Bit 7: 0 (fixed)
5 Bits 6 ... 0: channel type, 76h: counter module
Bit 7: further channel types available, 0: no, 1: yes
6 Number of diagnostic bits output by the module per channel (here 08
h
)
7 Number of channels of a module (here 01
h
)
8 Bit 0: error in channel group 0 (counter)
Bits 7 ... 1: 0 (fixed)
9 Diagnostic alarm due to process alarm lost to ...
Bit 0: hardware gate open
Bit 1: hardware gate closed
Bit 2: overflow/underflow/final value
Bit 3: comparison value reached
Bit 4: latch value
Bits 7 ... 5: 0 (fixed)
10 ... 16 0 (fixed)