Lenze I/O system 1000 System Manual - Manual (Page 103)

Product description
I/O compound modules − digital I/O
2 digital outputs with time stamp function − EPM−S310
3
l
103 EDSIO1000 EN 7.0
Technical data
EPM−S310: rated data
Module identifier 3905
dec
Current consumption/power loss
Current consumption from backplane bus 85 mA
Power loss 0.95 W
Digital outputs
Number of outputs 2
Cable length
shielded 1000 m
unshielded 600 m
Load voltage
Nominal value DC 24 (DC 20.4 ... 28.8 V)
Current consumption from load voltage
L+ 15 mA (without load)
Total current
for each group, horizontal structure,
40°C 1 A
for each group, horizontal structure,
60°C 1 A
for each group, vertical structure 1 A
Output current
for "1" signal, nominal value 0.5 A
Output delay
from "0" to "1" Max. 100 ns
from "1" to "0" Max. 100 ns
Lamp load 10 W
Parallel switching of outputs
for redundant control Not possible
for power increase Not possible
Control of a digital input Possible
Switching frequencies
for ohmic loads Max. 40 Hz
for inductive loads Max. 40 Hz
for lamp loads Max. 40 Hz
Limitation (internal) of the inductive
breaking voltage L+ (−52 V)
Short circuit protection of the output Electronically; only highside
Operating threshold of the protection
system 2.5 A
Output data size 60 bits