Lenze I/O system 1000 System Manual - Manual (Page 624)

PROFINET communication 12
l
624 EDSIO1000 EN 7.0
I&M data for PROFINET−IO
Identification data Access Lenze Description
Identification data 0: (Index AFF0h)
VendorIDHigh Read (1 byte) 02h Name of the
manufacturer
VendorIDLow Read (1 byte) 2Bh
Order_ID Read (20 bytes) Order number
IM_SERIAL_NUMBER Read (16 bytes) − Serial number
IM_HARDWARE_REVISION Read (2 bytes) 1 HW output version
IM_SOFTWARE_REVISION
l SWRevisionPrefix
l IM_SWRevision_Functional_Enhancement
l IM_SWRevision_Bug_Fix
l IM_SWRevision_Internal_Change
Read
(1 byte)
(1 byte)
(1 byte)
(1 byte)
V, R, P, U, T
00h ... FFh
00h ... FFh
00h ... FFh
Firmware version
IM_REVISION_COUNTER Read (2 bytes) 0000h for internal use
IM_PROFILE_ID Read (2 bytes) 0000h for internal use
IM_PROFILE_SPECIFIC_TYPE Read (2 bytes) 0005h for internal use
IM_VERSION
l IM_Version_Major
l IM_Version_Minor
Read
(1 byte)
(1 byte) 0101h Version of the I&M
data
(e.g. 0101h =
version 1.1)
IM_SUPPORTED Read (2 bytes) 000Eh I&M1 ... I&M3 are
available
Maintenance data 1: (Index AFF1h)
IM_TAG_FUNCTION Read/write
(32 bytes) − Selection of a clear
identification
throughout the
system
IM_TAG_LOCATION Read/write
(22 bytes) − Selection of the
mounting place
Maintenance data 2: (Index AFF2h)
IM_DATE Read/write
(16 bytes) YYYY−MMDD
HH:MM Selection of an date
Maintenance data 3: (Index AFF3h)
IM_DESCRIPTOR Read/write
(54 bytes) − Selection of a
comment