Lenze I/O system 1000 System Manual - Manual (Page 513)

EtherCAT Kommunikation
Parameterising the counter
Two counters 32 bits, 24 V DC − EPM−S601
10
l
513 EDSIO1000 EN 7.0
Lenze Description/value Name Subindex
0B Final value counter 1 Counting method:
0x310D: byte 3 (high byte)
0x310E: byte 2
0x310F: byte 1
0x3110: byte 0 (low byte) 00
h
0C Loading value
counter 1 Counting method:
0x3109: byte 3 (high byte)
0x310A: byte 2
0x310B: byte 1
0x310C: byte 0 (low byte) 00
h
0D Hysteresis counter 1 The hysteresis for instance serves to avoid frequent switching
operations of the output and/or triggering of the alarm when
the count value is within the range of the comparison value. For
the hysteresis you can select a range between 0 and 255. With
the settings 0 and 1 the hysteresis is switched off.
The hysteresis has an effect on the zero crossing, comparison,
overflow/underflow. 00
h
0E Reserved
0F Alarm response
counter 2 See counter 1 00
h
10 Counter function
counter 2 See counter 1 00
h
11 Comparator
counter 2 See counter 1 00
h
12 Signal evaluation
counter 2 See counter 1 00
h
13 Set value counter 2 See counter 1 00
h
14 Final value counter 2 See counter 1 00
h
15 Loading value
counter 2 See counter 1 00
h
16 Hysteresis counter 2 See counter 1 00
h