7 2 analog inputs 0/4 ma (16 bits) - epm-s408, 2 analog inputs 0/4 ma (16 bits) − epm−s408, Product description – Lenze I/O system 1000 System Manual User Manual
Page 128: Stop
Product description
I/O compound modules − analog I/O
2 analog inputs 0/4 ... 20 mA (16 bits) − EPM−S408
l
128
EDSIO1000 EN 7.0
3.7.7
2 analog inputs 0/4 ... 20 mA (16 bits) − EPM−S408
This module detects up to four analog control signals from the process level and transmits
them to the higher−level bus system.
)
Note!
The UL approval for this module is in preparation.
Features
ƒ
2 analog inputs
ƒ
Current range 0/4 ... 20 mA
ƒ
16−bit resolution
ƒ
Signal function is parameterisable
ƒ
An LED indicates if an input signal is outside the permissible measuring range
(
Stop!
Overvoltage at the inputs
The electronics of the electronic module are not protected against too high
input signals.
Possible consequences:
ƒ
The module is destroyed
Protective measures:
ƒ
Make sure that the signals and encoders connected match the measuring
range parameterised.
Overview
DC24V
0V
A
A
AI
1
2
3
4
5
6
7
8
EPM-S408
AI1
AI2
1
0
SLIOS408
Fig. 3−34
Elements and circuit diagram
0
Displays for module status
1
Terminals
1 ... 8
Connection number