Lenze I/O system 1000 System Manual - Manual (Page 670)

PROFINET communication
Parameterising the counter
Two counters 32 bits, 24 V DC − EPM−S601
12
l
670 EDSIO1000 EN 7.0
EPM−S601 control word
Bit Designation Function
0 − Reserved
1 CTRL_COMP_SET Enables the comparison bit
2 SW_GATE_SET Sets the software gate
3 − Reserved
4 − Reserved
5 COUNTERVAL_SET Sets the counter temporarily to the value in the set value
6 RES_SET Resets bits STS_CMP, STS_END, STS_OFLW, STS_UFLW and STS_ZP with a
rising edge
7 − Reserved
8 − Reserved
9 CTRL_COMP_RESET Inhibits comparison bit
10 SW_GATE_RESET Resets the software gate
11 − Reserved
12
13
14
15