Association history – Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 992
980
Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, an Access Point, then a connected client.
3. Select WMM TPSEC.
FIGURE 167
Wireless Client - WMM TPSEC screen
The top portion of the screen displays the TSPEC stream type and whether the client has roamed.
The Ports Stats field displays the following:
4. Periodically select Refresh to update the screen to its latest values.
Association History
Sequence Number
Lists a sequence number that’s unique to this WMM TPSEC uplink or downlink data stream.
Direction Type
Displays whether the WMM TPSEC data stream is in the uplink or downlink direction.
Request Time
Lists each sequence number’s request time for WMM TPSEC traffic in the specified direction. This is
time allotted for a request before packets are actually sent.
Used Time
Displays the time the client used TSPEC. The client sends a delete traffic stream (DELTS) message when
it has finished communicating.
TID
Displays the parameter for defining the traffic stream. TID identifies data packets as belonging to a
unique traffic stream.