Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 705)

Brocade Mobility RFS Controller System Reference Guide 693
53-1003099-01
13
9. Within the Controller(s) tab, select the controller from the Select a Controller field to filter
events to display. To filter messages further, select a RF Domain from the Filter by RF Domain
field.
10. Within the Access Point(s) tab, select the RF Domain from the Select a RF Domain field to filter
events to display. To filter messages further, select a device from the Filter by Device field.
11. Select Fetch Historical Events from the lower, right-hand, side of the UI to populate the table
with either device or RF Domain events. The following event data is fetched and displayed:
12. Select Clear All to clear events and begin new event data gathering.
Crash Files
Use the Crash Files screen to review files created when a controller or service platform encounters
a critical error or malfunction. Use crash files to troubleshoot issues specific to the device on which
a crash event was generated. These are issues impacting the core (distribution layer). Once
reviewed, files can be deleted or transferred for archive. Crash files can be sent to a support team
to expedite issues with the reporting device.
1. Select Diagnostics > Crash to display the crash file information.
Once a target device has been selected its crash file information displays in the viewer on the
right.
Timestamp Displays the Timestamp (time zone specific) when the fault occurred.
Module Displays the module used to track the event. Events detected by other module are not tracked.
Message Displays error or status messages for each event listed.
Severity Displays the severity of the event as defined for tracking from the Configuration screen. Severity options
include:
All Severities – All events are displayed irrespective of their severity
Critical – Only critical events are displayed
Error – Only errors and above are displayed
Warning – Only warnings and above are displayed
Informational – Only informational and above events are displayed
Source Displays the MAC address of the source device tracked by the selected module.
Hostname Lists the administrator assigned hostname of the source device tracked by the selected module.
RF Domain Displays the RF Domain membership of the source device tracked by the selected module.