Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 767)

Brocade Mobility RFS Controller System Reference Guide 755
53-1003099-01
15
FIGURE 10 RF Domain - Devices screen
AP Detection
RF Domain Statistics
The AP Detection screen displays information about detected Access Points that are not members
of a RF Domain. The could be authorized devices or potential rogue devices.
To view device information on detected Access Points:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
Device Displays the system assigned name of each device that’s a member of the RF Domain. The name
displays as a link that can be selected to display configuration and network address information in
greater detail.
AP MAC Address Displays each device’s factory encoded MAC address as its hardware identifier.
Type Displays each device model within the selected RF Domain.
Client Count Displays the number of clients connected with each listed device. BR1220, BR71XX, BR1240
models can support up to 256 clients per Access Point. Brocade Mobility 6511 Access Point model
can support up to 128 clients per Access Point.
Radio Count Displays the number of radios on each listed device. Brocade Mobility 7131 Access PointN models
can support from 1-3 radios depending on the hardware SKU. BR1220, BR71XX, BR1240 models
have two radios. Brocade Mobility 6511 Access Point model haS one radio.
IP Address Displays the IP address each listed device is using a network identifier.
Refresh Select the Refresh button to update the statistics counters to their latest values.