Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 867)

Brocade Mobility RFS Controller System Reference Guide 855
53-1003099-01
15
Viewing DHCP Server Networks Information
DHCP Server
The DHCP server maintains a pool of IP addresses and client configuration parameters (default
gateway, domain name, name servers etc). On receiving a valid client request, the server assigns
the requestor an IP address, a lease (the validity of time), and other IP configuration parameters.
The Networks screen provides network pool information such as the subnet for the addresses you
want to use from the pool, the pool name, the used addresses and the total number of addresses.
To view the DHCP Server Networks information:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Expand the DHCP Server menu from the left-hand side of the UI.
4. Select Networks.
FIGURE 75 Wireless Controller - DHCP Server Networks screen
The Networks screen displays the following:
Firewall
Controller Statistics
Name Displays the name of the virtual network (VLAN) from which IP addresses can be issued to DHCP client
requests on the listed controller or service platform interface.
Subnet Address Displays the subnet for the IP addresses used from the network pool.
Used Addresses Displays the number of host IP addresses allocated by the DHCP server.
Total Addresses Displays the total number of IP addresses available in the network pool for requesting clients.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.