Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 121)

Brocade Mobility RFS Controller System Reference Guide 109
53-1003099-01
5
16. Select OK to save the changes and overrides to the security configuration. Select Reset to
revert to the last saved configuration.
17. Select the Spanning Tree tab.
FIGURE 39 Profile Overrides - Port Channels Spanning Tree screen
18. Define or override the following PortFast parameters for the port channel’s MSTP
configuration:
19. Set or override the following MSTP Configuration parameters for the port channel:
Enable PortFast Select this option to enable drop-down menus for both the Enable Portfast BPDU Filter and Enable
Portfast BPDU guard options for the port. This setting is disabled by default.
PortFast BPDU Filter Enable PortFast to invoke a BPDU filter for this portfast enabled port channel. Enabling the BPDU filter
feature ensures this port channel does not transmit or receive any BPDUs.
PortFast BPDU Guard Enable PortFast to invoke a BPDU guard for this portfast enabled port channel. Enabling the BPDU
Guard feature means this port will shutdown on receiving a BPDU. Hence no BPDUs are processed.
Enable as Edge Port Select this option to define this port as an edge port. Using an edge (private) port, you can isolate
devices to prevent connectivity over this port channel. This setting is disabled by default.